Table 1 Materials used in the study
Materials | Composition | Manufacturer/batch # |
|---|---|---|
Single bond 2 (SB2) | Water, ethanol, Bis-GMA, HEMA, UDMA, Bisphenol A glyceralote, polyalquenoic acid copolymer, dimetacrylate, nanofiller | 3 M/ESPE. St. Paul, MN, USA #5EP |
Scotch bond multipurpose (B) | - Bond SBMP: Bis-GMA, HEMA, photoinitiator | 3 M/ESPE. St. Paul, MN, USA #5HP |
Filtek flow (FL) | Bis-GMA, TEGDMA, Zirconia, Sílica, camphorquinone, nanofilller | 3 M/ESPE. St. Paul, MN, USA #6031A2 |
Clearfil S3 (CS3) | MDP, Bis-GMA, HEMA, hydrophobic dimetacrylate, photoinitiator, ethanol. | Kuraray Medical, Tokio, Japan # 00001A |
Protect liner (PL) | Bis-GMA,TEGDMA, fluoride methil methacrylate, camphorquinone, silanized colloidal silica. | Kuraray Medical, Tokio, Japan F # 0046 |
Clearfil SE bond (CSEB) | MDP, Bis-GMA, HEMA, hydrophobic dimetacrylate, photoinitiator. | Kuraray Medical, Tokio, Japan # 00001A |
Rely X ARC | BisGMA TEGDMA, Functionalized dimethacrylate polymer, silane treated Zirconia and Silica, 2-benzotriazolyl-4-methylphenol, 4-(dimethylamino)-benzeneethanol | 3 M/ESPE. St. Paul, MN, USA #5HP |