Skip to main content
Applied Adhesion Science
Figure 7 | Applied Adhesion Science

Figure 7

From: Surface analytical approaches contributing to quality assurance during manufacture of functional interfaces

Figure 7

Results of non-destructive surface analysis using Optically Stimulated Electron Emission (OSEE) for freshly ground SAE 1008/1010 and 1.4301 steel during exposure in dry air. The horizontal dashed lines at the left side of the plot indicate the OSEE signals of as-received steel samples. Horizontal dashed lines at the right side indicate OSEE signals remaining basically unchanged after approximately two hours of exposure in air.

Back to article page