Skip to main content

Table 2 Sample placement and used methods for each release agent

From: Investigation of fluorine-based release agents for structural adhesive bonding of carbon fibre reinforced plastics

Section Method Number of samples
Whole panel Ultrasound  
1 Peel resistance 1
2 and 4 Confocal laser scanning microscopy 2
3-1 and 3-2 Centrifugal adhesion test 6 / 6a
5 Scanning electron microscopy 2 / 2a
5 Photoelectron spectroscopy 2 / 2a
  1. aWith and without pre-treatment, respectively