TY - JOUR AU - Rudawska, Anna PY - 2019 DA - 2019/11/21 TI - Comparison of the adhesive joints’ strength of the similar and dissimilar systems of metal alloy/polymer composite JO - Applied Adhesion Science SP - 7 VL - 7 IS - 1 AB - The aim of the present article is to compare the strength of the adhesive lap joints of the selected materials used in aviation. The joints were made in the similar and dissimilar systems with the use of three epoxy adhesives. Three different adherends were used: the EN AW-7075 aluminium alloy, the aramid-epoxy composite and the carbon-epoxy composite. Three adhesive compounds based on the Epidian 53 epoxy resin and three types of curing agents: two amine curing agents—Z1 (triethylenetetramine curing agent) and IDA, and one polyamide curing agent—PAC (polyaminoamide C) were used to make the adhesive joints. Three variants of similar joints and two variants of dissimilar joints were prepared for the tests. The shear strength was defined according to the ISO 4587 standard, with the use of Zwick/Roell 150 testing machine. In addition, the joined materials’ surface roughness was measured. Based on the strength test’s results, it was observed that the highest strength was obtained by the adhesive joints made with the Epidian 53/PAC/100:80 adhesive compound and that, in the majority of cases; similar joints show higher strength. SN - 2196-4351 UR - https://doi.org/10.1186/s40563-019-0123-x DO - 10.1186/s40563-019-0123-x ID - Rudawska2019 ER -