Skip to content


Open Access

Erratum to: Mode I critical fracture energy of adhesively bonded joints between glass fiber reinforced thermoplastics

  • Siripong Mahaphasukwat1,
  • Kazumasa Shimamoto1,
  • Shota Hayashida1,
  • Yu Sekiguchi2 and
  • Chiaki Sato2Email author
Applied Adhesion Science20153:11

Received: 22 April 2015

Accepted: 22 April 2015

Published: 20 May 2015

The original article was published in Applied Adhesion Science 2015 3:4

The authors detected some errors in the main text of the above mentioned article [1], which the publisher would like to correct.

The correct versions of Equations 2, 5 and 7 are given below.
$$ {g}_{\mathrm{I}}=\frac{P^2}{2B}\frac{dC}{da} $$
$$ {g}_{\mathrm{I}}=\frac{P^2{a}^2}{BEI}=\frac{12{P}^2{a}^2}{B^2{h}^3E} $$
$$ {g}_{\mathrm{I}}=\frac{P^2}{B\sqrt[3]{EI}}{\left(\frac{3\delta }{2P}\right)}^{2/3} $$


Authors’ Affiliations

Graduate school, Tokyo Institute of Technology, Yokohama, Japan
Precision and Intelligence Laboratory, Tokyo Institute of Technology, Yokohama, Japan


  1. Mahaphasukwat S, Shimamoto K, Hayashida S, Sekiguchi Y, Sato C. Appl Adhes Sci 2015, 3:4 doi:10.1186/s40563-015-0036-2Google Scholar


© Mahaphasukwat et al.; licensee Springer. 2015

This is an Open Access article distributed under the terms of the Creative Commons Attribution License (, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly credited.