Skip to content

Advertisement

Articles

Sort by
Page 2 of 5
  1. Content type: Research

    This study investigated the effect of adding different concentrations of phosphate-grafted-silica nanoparticles (SiO2–POOH) on dentin bond strength of experimental one-step self-etching adhesives (1-SEAs). Phosph...

    Authors: Carine Tais Welter Meereis, Carlos Enrique Cuevas Suárez, Suzanne Mendes de Almeida, Carianne Mendes de Almeida, Evandro Piva, Fabrício Mezzomo Collares and Fabrício Aulo Ogliari

    Citation: Applied Adhesion Science 2016 4:19

    Published on:

  2. Content type: Research

    An epoxy monolith layer with porous structure is fabricated on the surface of a stainless steel (SUS) plate by polymerization induced phase separation process as the mediator for the bonding of SUS and various...

    Authors: Fai Uehara and Akikazu Matsumoto

    Citation: Applied Adhesion Science 2016 4:18

    Published on:

  3. Content type: Research

    The aim of this study was evaluate the influence of the substance used as root canal lubricant during relining and the cleaning protocol on the bond strength of relined posts to root dentin. Eighty single cana...

    Authors: César Blaas Knabach, Victório Poletto-Neto, Rafael Sarkis-Onofre, Maximiliano Sérgio Cenci, Tatiana Pereira-Cenci and Rogério de Castilho Jacinto

    Citation: Applied Adhesion Science 2016 4:17

    Published on:

  4. Content type: Research

    This study compared the microtensile bond strength (BS) and the micromorphology of resin-dentin interface (MI) of a conventional adhesive to two-steps etch-and-rinse bonding agents after 1 year of water storag...

    Authors: Adriana Oliveira Carvalho, Renata Bacelar-Sá, Osvaldo Wodevotzky Jr., Gláucia Maria Bovi Ambrosano, Pascal Christophe Magne and Marcelo Giannini

    Citation: Applied Adhesion Science 2016 4:16

    Published on:

  5. Content type: Research

    The interference of eugenol on the adhesive systems and composite polymerization could promote a higher marginal microleakage. This could be reduced by mechanical and chemical cleansing. The objective of this ...

    Authors: Murilo Baena Lopes, Klissia Romero Felizardo, Renan Hideki Kaneshima, Sandrine Berger Guiraldo, Ricardo Danil Guiraldo and Alcides Gonini Júnior

    Citation: Applied Adhesion Science 2016 4:15

    Published on:

  6. Content type: Research

    Fiber posts (FP) are commonly used for extensive coronal reconstructions, often being associated with composite resins (CR) in order to minimize the space between the post and the intraradicular dentin. This s...

    Authors: Pedro José Andrade da Silva, Roberta Tarkany Basting Hoffing, Flávia L. B. do Amaral, Cecília P. Turssi, Carlos Eduardo Sabrosa Borges da Silva and Fabiana Mantovani Gomes França

    Citation: Applied Adhesion Science 2016 4:14

    Published on:

  7. Content type: Research

    Adhesives used to bond the wood panels are petroleum-based and has volatile organic compound, VOCs. Harmful substance when inhaled by human being and can cause different problems, such as cancer. As an alterna...

    Authors: Caroline Rodrigues Pereira, Richard Eduard Mölleken, Felipe Hermenegildo de Souza, Giovanni Schiavinatto Capellari, Salvador Claro Neto and Elaine Cristina Azevedo

    Citation: Applied Adhesion Science 2016 4:13

    Published on:

  8. Content type: Research

    This study, we evaluated the effect of green tea on the shear bond strength of metal orthodontic brackets to human enamel after home whitening treatment. Ninety premolars were selected and divided into six exp...

    Authors: Renata C. A. Schwertner, Joyce S. Y. Leoncio, Alessandro Schwertner, Ricardo D. Guiraldo, Murilo B. Lopes, Hellen C. De Carvalho, Alcides Gonini-Júnior and Sandrine B. Berger

    Citation: Applied Adhesion Science 2016 4:12

    Published on:

  9. Content type: Research

    Adhesives are used in various industries to bond materials. The failure criteria of adhesive joints are based on the strength (peel) and fracture mechanisms of the materials. It is important to investigate the...

    Authors: Hyun-Bum Kim, Kimiyoshi Naito and Hiroyuki Oguma

    Citation: Applied Adhesion Science 2016 4:10

    Published on:

  10. Content type: Research

    Edge-glued panels are composed by the lateral and top gluing with adhesives of solid battens. These panels use small pieces of wood, offering an optimal usage of forest resources and the development of higher ...

    Authors: Richard Eduard Mölleken, Rosilani Trianoski, Salvador Claro Neto, Caroline Rodrigues Pereira, Setsuo Iwakiri and Elaine Cristina Azevedo

    Citation: Applied Adhesion Science 2016 4:9

    Published on:

  11. Content type: Research

    The objective of this study was to evaluate the enamel roughness and shear bond strength (SBS) of dental composite after removal of metal brackets bonded with different materials (Transbond XT, Filtek Z100, Ve...

    Authors: Ricardo Danil Guiraldo, Sandrine Bittencourt Berger, Fernando dos Santos Rocha, Gabriela Miranda Rodrigues Pereira, Anderson Rafael Aleixo, Américo Bortolazzo Correr, Edwin Fernando Ruiz Contreras, Alcides Gonini-Júnior and Murilo Baena Lopes

    Citation: Applied Adhesion Science 2016 4:8

    Published on:

  12. Content type: Research

    Magnesium and its alloys are the lightest metallic materials used for structural applications. Tuning the surface functionalization of magnesium alloys may contribute to increasing their durability. Dry or wet...

    Authors: Stephani Stamboroski, Priscilla Natalli Stachera, Yendry Regina Corrales Ureña, Gustavo Homann Hrycyna, Wilson Iraja Taborda Ribas Neto, Wagner Kazuki de Azambuja, Dirk Salz, Jörg Ihde, Paul-Ludwig Michael Noeske and Welchy Leite Cavalcanti

    Citation: Applied Adhesion Science 2016 4:6

    Published on:

  13. Content type: Research

    The use of adhesive bonding for designing lightweight load-bearing components has increased in recent decades. In this paper the influence of plasticity on the lifetime prediction of bonded joints using the st...

    Authors: Vinicius Carrillo Beber, Pedro Henrique Evangelista Fernandes, Juliana Espada Fragato, Bernhard Schneider and Markus Brede

    Citation: Applied Adhesion Science 2016 4:5

    Published on:

  14. Content type: Research

    The present work describes pretreatment processes of thermoplastic polyurethane elastomer (TPU) material, used as an adhesive in powder form, that results in the increased peeling resistance of joints. The TPU...

    Authors: Geovana de Avila Bockorny, Maria Madalena Camargo Forte, Stephani Stamboroski, Michael Noeske, Andreas Keil and Welchy Leite Cavalcanti

    Citation: Applied Adhesion Science 2016 4:4

    Published on:

  15. Content type: Research

    Bonded indirect restorations require two appointments: one for provisional treatment and one for luting with resin cement and dentin bonding agents (DBA). The DBA layer may be accomplished during a delayed den...

    Authors: Carlos Junio Ribeiro da Silva, Izabela Caroline Santana Gonçalves, Maria Paula Jacobucci Botelho, Ricardo Danil Guiraldo, Murilo Baena Lopes and Alcides Gonini Júnior

    Citation: Applied Adhesion Science 2016 4:3

    Published on:

  16. Content type: Research

    The formation of nano-scale biofilms on hydrophilic silica surfaces from aqueous polypeptide/polysaccharide mixtures containing laccase and maltodextrin was investigated in situ with quartz crystal microbalanc...

    Authors: Yendry Regina Corrales Ureña, Linda Gaetjen, Matheus Vieira Nascimento, Paulo Noronha Lisboa Filho, Welchy Leite Cavalcanti, Paul-Ludwig Michael Noeske and Klaus Rischka

    Citation: Applied Adhesion Science 2016 4:2

    Published on:

  17. Content type: Research

    The automotive industry is currently increasing its use of high performance structural adhesives in order to reduce vehicle weight and increase the crash resistance of automotive structures. To achieve these g...

    Authors: J. P. R. Monteiro, R. D. S. G. Campilho, E. A. S. Marques and L. F. M. da Silva

    Citation: Applied Adhesion Science 2015 3:25

    Published on:

  18. Content type: Research

    The aim of this study was to determine the degree of conversion (DC) for five orthodontic resins with different viscosities, to examine a probable relationship between the viscosity factor and the degree of c...

    Authors: Lorenna Oliveira Fernandes de Araujo, Osmar Barreto, Adriano Augusto Melo de Mendonça and Rodrigo França

    Citation: Applied Adhesion Science 2015 3:26

    Published on:

  19. Content type: Research

    The aim of present study was evaluate the effect of different percentages of an organo-functionalized silane monomer as adhesion promoter between barium borosilicate glass fillers and (co)monomer blend in expe...

    Authors: Cesar Henrique Zanchi, Fabrício Aulo Ogliari, Ricardo Marques e Silva, Rafael Guerra Lund, Heloisa Har Machado, Carlo Prati, Neftalí Lenin Villarreal Carreño and Evandro Piva

    Citation: Applied Adhesion Science 2015 3:27

    Published on:

  20. Content type: Research

    Fiber-reinforced composites have recently been advocated as an alternative to fixed metal framework prostheses. The aim of this study was to evaluate the effect of glass-fiber reinforcement on the flexural st...

    Authors: Rodrigo Vieira Caixeta, Ricardo Danil Guiraldo, Sandrine Bittencourt Berger, Edmilson Nobumitu Kaneshima, Élcio Mário Faria Júnior, Amauri Cruz Drumond, Alcides Gonini Júnior and Murilo Baena Lopes

    Citation: Applied Adhesion Science 2015 3:24

    Published on:

  21. Content type: Research

    This study investigated the influence of the waiting time for placing resin composite (RC) restorations after dental bleaching on the shear bond strength (SBS) to enamel. Seventy bovine incisors were obtained,...

    Authors: Alice Hammes Pimentel, Lisia Lorea Valente, Cristina Pereira Isolan, Eliseu Aldrighi Münchow, Evandro Piva and Rafael Ratto de Moraes

    Citation: Applied Adhesion Science 2015 3:23

    Published on:

Page 2 of 5