Page 2 of 3
Gecko’s foot hairs exhibit significant frictional anisotropy that enables a strong foot grip in a specific direction and an easy detachment in the opposite direction. In this study, we fabricate adhesive devic...
Double cantilever beam (DCB) tests under impact loading conditions were conducted using a falling-wedge impact test machine and a high-speed camera. The change in mode I fracture energy G
To develop an adhesion system satisfying both constant adhesion strength during use and quick debonding ability during a dismantling process.
This paper reports on the adhesion characteristics between microspheres and rubber surfaces. Silica, polystyrene, and poly(methyl methacrylate) microspheres were deposited on cis-1,4-polybutadiene (BR) films. A B...
Adhesion hysteresis was investigated with the energy dissipation in the contact experiments between a spherical glass lens and a polydimethylsiloxane (PDMS) block. The experiments were conducted under step-by-...
Effects of mixed micro and nano silica particles on the dynamic stiffness, stress transmissibility, and energy absorption of the epoxy composite were investigated using the split Hopkinson pressure bars. It wa...
The objective of this study was to evaluate the coumarin-based iodonium hexafluoroantimonate (P3C-Sb) in the polymerization kinetics of an experimental model adhesive resin both in presence of solvent and acid...
This study evaluated the effect of aging methods on the bond strength of etch-and-rinse adhesive systems to dentin cavities. Eighty bovine incisors were used to prepare dentin cavities, which were bonded with ...
An experimental investigation was performed to study the effect of surface roughness and oxidation on the shear strength of single-lap-joints of AA6061, AA7075 aluminum alloys and an AISI 1080 steel alloy bond...
This study evaluated the effect of different ceramic primers and heat treatment of silane coupling agents on bond strength of resin cement to glass ceramic. Five ceramic primers (Clearfil Ceramic Primer/CCP, M...
This study investigated the effect of adding different concentrations of phosphate-grafted-silica nanoparticles (SiO2–POOH) on dentin bond strength of experimental one-step self-etching adhesives (1-SEAs). Phosph...
An epoxy monolith layer with porous structure is fabricated on the surface of a stainless steel (SUS) plate by polymerization induced phase separation process as the mediator for the bonding of SUS and various...
The aim of this study was evaluate the influence of the substance used as root canal lubricant during relining and the cleaning protocol on the bond strength of relined posts to root dentin. Eighty single cana...
This study compared the microtensile bond strength (BS) and the micromorphology of resin-dentin interface (MI) of a conventional adhesive to two-steps etch-and-rinse bonding agents after 1 year of water storag...
The interference of eugenol on the adhesive systems and composite polymerization could promote a higher marginal microleakage. This could be reduced by mechanical and chemical cleansing. The objective of this ...
Fiber posts (FP) are commonly used for extensive coronal reconstructions, often being associated with composite resins (CR) in order to minimize the space between the post and the intraradicular dentin. This s...
Adhesives used to bond the wood panels are petroleum-based and has volatile organic compound, VOCs. Harmful substance when inhaled by human being and can cause different problems, such as cancer. As an alterna...
This study, we evaluated the effect of green tea on the shear bond strength of metal orthodontic brackets to human enamel after home whitening treatment. Ninety premolars were selected and divided into six exp...
Adhesives are used in various industries to bond materials. The failure criteria of adhesive joints are based on the strength (peel) and fracture mechanisms of the materials. It is important to investigate the...
Edge-glued panels are composed by the lateral and top gluing with adhesives of solid battens. These panels use small pieces of wood, offering an optimal usage of forest resources and the development of higher ...
The objective of this study was to evaluate the enamel roughness and shear bond strength (SBS) of dental composite after removal of metal brackets bonded with different materials (Transbond XT, Filtek Z100, Ve...
To clarify the optimal amount of air-drying time, this study measured the time taken to remove residual excess solvent from self-etching primer under observation with a 3D video microscope. One hundred teeth w...
Magnesium and its alloys are the lightest metallic materials used for structural applications. Tuning the surface functionalization of magnesium alloys may contribute to increasing their durability. Dry or wet...
The use of adhesive bonding for designing lightweight load-bearing components has increased in recent decades. In this paper the influence of plasticity on the lifetime prediction of bonded joints using the st...
The present work describes pretreatment processes of thermoplastic polyurethane elastomer (TPU) material, used as an adhesive in powder form, that results in the increased peeling resistance of joints. The TPU...
Bonded indirect restorations require two appointments: one for provisional treatment and one for luting with resin cement and dentin bonding agents (DBA). The DBA layer may be accomplished during a delayed den...
The formation of nano-scale biofilms on hydrophilic silica surfaces from aqueous polypeptide/polysaccharide mixtures containing laccase and maltodextrin was investigated in situ with quartz crystal microbalanc...
The original article was published in Applied Adhesion Science 2015 3:17
This paper focuses at wetting on Al-based quasicrystals and complex metallic alloys (CMAs), which comprise a significant number of crystalline compounds of changing lattice complexity, according to compositio...
The aim of present study was evaluate the effect of different percentages of an organo-functionalized silane monomer as adhesion promoter between barium borosilicate glass fillers and (co)monomer blend in expe...
The aim of this study was to determine the degree of conversion (DC) for five orthodontic resins with different viscosities, to examine a probable relationship between the viscosity factor and the degree of c...
The automotive industry is currently increasing its use of high performance structural adhesives in order to reduce vehicle weight and increase the crash resistance of automotive structures. To achieve these g...
Fiber-reinforced composites have recently been advocated as an alternative to fixed metal framework prostheses. The aim of this study was to evaluate the effect of glass-fiber reinforcement on the flexural st...
This study investigated the influence of the waiting time for placing resin composite (RC) restorations after dental bleaching on the shear bond strength (SBS) to enamel. Seventy bovine incisors were obtained,...
Corrosion of oil and gas pipelines significantly reduces the service life of the pipelines, thus increasing costs, and more seriously, it can cause catastrophic environmental accidents. More recently, the expl...
This paper describes an experimental and theoretical analysis of strengthened damaged reinforced concrete corbel by gluing carbon fibre fabrics. The main objective of this study is to investigate the damage e...
In this paper, an experimental study on the effect of surface roughness of different adherend material on adhesive bond strength was carried out. The adherend material used was aluminium AA6061 and wood in the...
The aim of this study was to evaluate the influence of air-abrasion executed with Bioglass 45S5 on the bonding performance of total and self-etching techniques. Human molars were divided into four groups (n =...
This paper is intended to demonstrate how the parameters for the surface preparation of magnesium alloys for adhesive bonding can be optimized. The effects of different laser parameters are analyzed by using ...
The Erratum to this article has been published in Applied Adhesion Science 2016 4:1
To a certain extent, adhesive bonding of measurement equipment is very common in science and technology, e.g. adhesive bonding of small-scale strain gauges. Adhesive bonding of the entire equipment for a fully...
In this study, the failure strengths of adhesively bonded joints were investigated. The glass fiber epoxy composites used as adherends were manufactured by using vacuum assisted resin infusion method (VARIM)....
The effects of the increase in temperature are of great importance when evaluating the strength of an adhesive. Some processes in mining, such as copper electro-wining, produce thermal changes that modify the ...
The aim of this study was to evaluate the shear bond strength (SBS) of three different cements to zirconia and lithium disilicate ceramic surface after thermal cycling. Thirty zirconia (Z) and thirty lithium d...
The influence of the presence of copper on the network formation and the surface chemistry of an epoxy acrylate based solder mask system were investigated, with regards to the application of solder masks on co...
The original article was published in Applied Adhesion Science 2015 3:4
This paper introduces a new type of peel tests dedicated to composite bonding: Composite Peel Tests. This test is inspired on the standard floating roller peel test widely used for metal bonding.
